GCTek: AquaBead LH Filters

by GCTek
$ 2,064.95
Select Filter Size:

AquaBead LH Filters

AquaBead LH Filters

What do you do when you think you have designed the most perfect filter in the pond industry designed to have little restriction? You think harder and come up with an LH version. LH=Lower Head. Why is the lowest head or least restrictive filter desirable? It allows you to move more water with less electricity. This allows you to use a smaller pump to get the job done. With electrical rates on the rise through out the world it is only smart to think in this direction. The use of a smaller pump can save you hundreds of dollars a year.

The AquaBead LH has all the features of the AquaBead filter with the extra added benefits of the LHseries.

With years of thought and testing we are proud to release the filter that already has people talking. As one dealer put it "Do you realize what you have done? You have have just made the top mount multiport valve filters obsolete."

Since most of the restriction from a pressurized filter comes from the multiport valve we reengineered things to allow us to only use the multiport valve when you are going to backwash. You bypass the multiport when you are in the regular filtration mode.

Water only goes through the multiport valve when backwashing. Simply move 2 - 2 way type valves and the water flows through the multiport valve to allow for backwashing, rinse, etc. Then move the 2 way valves back to their original position and water flows through the filter as normal but unrestricted. Water enters the lower port and exits the upper port going back to the pond.

Why is all of this important? It allows you to run a smaller more energy efficient pump to do the same job. This is good for the environment and your pocket book.

The AquaBead LH Filter is available in a wide variety of sizes for every pond. If you are looking for a filter that has the lowest restriction of any filter made, this is it. You can use the most energy efficient pump on this filter and receive maximum flows with very little head pressure. This saves you at the electric meter and in the wallet. Truly an EcoFriendly filter for our modern day ponds.

AquaBead LH 2.50 Filter from GCTek Suitable for ponds up to 5,000 gallons.

All of the AquaBead LH filters utilize a revolutionary design to increase flows while not using any more electricity than normal. It's quite simple actually, since the biggest flow robber of filters is the multiport valve, we only use the multiport valve when backwashing and bypass it while in normal filtration mode. This provides greater turn over of the pond while not using more energy= $ savings and clearer water. Another GC Tek exclusive.

The 2.50cu.ft. AquaBead LH is the perfect filter for ponds up to 5000 gal. and fish loads up to 125 lbs. Flow rated at 70 gpm for bio-mechanical filtration. 21" X 32" allows you to hide this unit anywhere. Every option is standard equipment. 

The 4.25 cu.ft. AquaBead LH is the perfect filter for ponds up to 10000 gal. and fish loads up to 225 lbs. Flow rated at 90 gpm for bio-mechanical filtration. 24.75" X 34". 

The 6.0 cu.ft. AquaBead LH is the perfect filter for ponds up to 17000 gal. and fish loads up to 300 lbs. Flow rated at 120 gpm for bio-mechanical filtration. 30.5" X 36.75".

The 10.0 cu.ft. AquaBead LH is the perfect filter for ponds up to 30000 gal. and fish loads up to 450 lbs. Flow rated at 180 gpm for bio-mechanical filtration. 36.7/8" X 42".


You recently viewed

Clear recently viewed